E-Mail us

503-224-3766

PROCEDURE
Installing your ONHOLD player system is fast and easy following this simple guide. (NOTE - you may wish to mount your player on the wall or tie your connections to existing trunks of wire - to create a clean and functional area.) Begin your connection from the bottom of the following diagram and work to the top.

 Set your Timer (Digital players and ONHOLD on CD have no timer.) to start (red pin) 1 hour before the beginning of business each day, setting it to stop (black pin) 1 hour after the close of daily business. (NOTE - Be certain to consider bi-annual time changes in this setting.) Set the current time (to the closest 1/2 hour) and plug into the nearest electrical outlet.

 Place the ONHOLD message cassette or CD into the appropriate Player and plug it into the Timer. (Verification of playback, player function and tape or CD quality is recommended. Push play, verify and stop. If no playback occurs, be certain that the timer is appropriately set and the Timer is in the "on" position. CD playback cannot be heard without a headset.)

 Connect the Audio Cable to the "ext.speaker-earphone" jack on the Player and connect the opposite end to either:

 Re-start the Player and call your office number from the nearest phone, having the call placed on hold. Using the Player's volume control, select the playback volume for the best balance of loudness and clarity. (Do not attempt to adjust volume using your phone station's monitor or external speaker as the resulting balance is not the same for on hold.)